diff --git a/docs/Assignments/week_9_input_devices/image-16.jpg b/docs/Assignments/week_9_input_devices/image-16.jpg
new file mode 100644
index 0000000..b5df482
Binary files /dev/null and b/docs/Assignments/week_9_input_devices/image-16.jpg differ
diff --git a/docs/Assignments/week_9_input_devices/image-17.jpg b/docs/Assignments/week_9_input_devices/image-17.jpg
new file mode 100644
index 0000000..36e2046
Binary files /dev/null and b/docs/Assignments/week_9_input_devices/image-17.jpg differ
diff --git a/docs/Assignments/week_9_input_devices/image-18.jpg b/docs/Assignments/week_9_input_devices/image-18.jpg
new file mode 100644
index 0000000..b2ab552
Binary files /dev/null and b/docs/Assignments/week_9_input_devices/image-18.jpg differ
diff --git a/docs/Assignments/week_9_input_devices/input_devices.md b/docs/Assignments/week_9_input_devices/input_devices.md
index d4f567b..9c016b2 100644
--- a/docs/Assignments/week_9_input_devices/input_devices.md
+++ b/docs/Assignments/week_9_input_devices/input_devices.md
@@ -9,7 +9,7 @@ The more we pushed the potentiometer the higher the voltage became. So the volta
 
 ![alt text](image-6.jpg)
 
-![alt text](image-18.png)
+![alt text](image-18.jpg)
 Communication of oneWire Humidity sensor
 
 Later on Henk connected a ds18b20 to a signal analyzer and tried reading the protocol. Afterwards we did it ourselves to see the communication between a mcu and a ultrasonic sensor.
@@ -60,11 +60,11 @@ After
 It looks super messy but what I have done is. I broke one trace and created the same configuration as in the correct schematic. I connected the resistors wrongly and that caused all the power to go to ground instead of dividing the voltage to the analog pin and the ground.
 
 Now that this works I can work on the final design of the board and send it to a board house.
-![alt text](image-16.png)
+![alt text](image-16.jpg)
 This is my final design that I am going to send to the board house. I don't need any bridge resistors because I can do 2 layers with vias.
 
 
-![alt text](image-17.png)
+![alt text](image-17.jpg)
 I needed to submit my board 2 additional times because the first board was still faulty. The second board I forgot to export the solder masks and with the third one It got confirmed and accepted!
 Something else I found out is that if you order 5 boards you get a big discount on the shipping so that saved about 10 dollars.
 ## Voltage divider