cnc stuff

docs/Assignments/week_7_computer_controlled_cutting/lecute_notes.md

@@ -80,7 +80,7 @@ Kerf - Offset by tool diameter
 Runout - The tool may not be attached straight to the machine so it will create sloped cuts
 
 
-klein machining - cleaner cut but harder on machine - for finishing
+climb - cleaner cut but harder on machine - for finishing
 Conventional - To start out with is easier on the machine. Is more rough
 
 2d top down
@@ -114,4 +114,19 @@ Never do large format machining alone
 You want a second pair of eyes and ears always check each other
 Need to be well prepared
 
-Know how to turn the machine off before turning it on
+Know how to turn the machine off before turning it on
+
+
+Before you start milling all the documentation has been done.
+
+
+
+### Extra notes
+If you set the RPM too low it can't calculate the toolpath. For some reason when you change the rpm the the starting point changes when cutting a line.
+
+Pocket allowance = offset
+
+When doing the corners of a cut with filet. You need to double click the corner.
+
+Check the grain of the wood. One side works better than the other.
+TODO: add this to main docs