From d20b7b41505f6893c0488fb5bffd47931bb76ef1 Mon Sep 17 00:00:00 2001 From: Sam Hos Date: Mon, 10 Mar 2025 10:53:42 +0100 Subject: [PATCH] docs cleanup --- .../computer_controlled_cutting.md | 33 ++++--------------- 1 file changed, 7 insertions(+), 26 deletions(-) diff --git a/docs/Assignments/week_7_computer_controlled_cutting/computer_controlled_cutting.md b/docs/Assignments/week_7_computer_controlled_cutting/computer_controlled_cutting.md index 6e71a67..37d511f 100644 --- a/docs/Assignments/week_7_computer_controlled_cutting/computer_controlled_cutting.md +++ b/docs/Assignments/week_7_computer_controlled_cutting/computer_controlled_cutting.md @@ -1,37 +1,15 @@ # Computer controlled cutting -## How to set up the machine for use -* Clean the machine and sacrificial layer -* Make sure the machine is clear of any obstacles -* - +## How to use the shopbot ## Machine safety -Machine needs to be clear of any obstacles -The machine needs to be clean +Make sure the machine is clear of any obstacles. And make sure the sacrificial layer is clean so the material on top is flat on the bed. If it's not clean you could clean it using the yellow vacuum cleaner. +When you operate the machine, do it alone. Because there are a lot of steps. If you forget one step you have to go back to step 1 and re-do everything. -Make sure the sacrificial layer is clean so the material on top is flat on the bed. - -Make sure the rails of the machine are clear and clean - -When you do the assignment do it alone. Because there are a lot of steps. If you forget one step you have to go back to step 1 and re-do everything. - - -**Never** touch a running machine - - -Always check the ways out before you start the machine. Know where to leave in case of emergency. +Always check the exits out before you start the machine. Know where to leave in case of emergency. Make sure you know where the fire extinguishers are -Center of the mill is called the wedge - - -Vacuum tube sucks all the excess material. (chips of the cut wood) -It is the perfect environment for fires or dust explosions - -How to get something on fire. When the milling bit hits something metal or a screw. That creates sparks. - ### Vacuum system The vacuum is to suck up all the residue of the milling. In case the milling bit hits a screw. You instantly turn off the machine and check the bag. @@ -42,6 +20,7 @@ In case of emergency you can push the big red button and the machine will also t ![alt text](IMG_8623.jpg) This is the clip holding the bag in place. Pulling the clip will let the bag go. + ### Personal safety If you have long hair. Make sure your hair isn't loose. Use a hair band. Make sure you don't have any loose clothing or other accessories on you. @@ -257,3 +236,5 @@ You can see a big difference in the edges with conventional and climb. Climb mil ![alt text](image-8.png) +### Assignment inspirations +https://www.pilatshop.nl/product/anneke-etagere/ \ No newline at end of file