Merge branch 'main' of ssh://gitlab.fdmci.hva.nl/propedeuse-hbo-ict/onderwijs/2023-2024/out-a-se-ti/blok-3/qaajeeqiinii59

docs/LearningProcessBram/documentatie/FirstDocumentation.md

@@ -10,7 +10,7 @@ Then I came across a teaching site (https://www.codingkids.nl/arduino-buzzer.htm
 ### Arduino Video 
 I watched a video about using Arduino and took a lot of op notes along the way.  
 The link is: (https://www.youtube.com/watch?v=BLrHTHUjPuw). 
-
+```
 \/\/Arduino information: 
 
 \/pinnumber(locatie, in-/output) 
@@ -69,13 +69,13 @@ examples, basics, fade
 \/ servo's  
 
 examples, servo, sweep 
-
+```
 ### Linux and raspberry PI. 
 To gain more knowledge about Linux, I first asked my classmates if they could get me started.  
 
 They showed me how to gain access to a server and told me how to navigate through files. 
 By doing this I got taught the following commands: 
-
+```
 ~ $ 'ls -la' = show file / folders 
 
 ~ $ 'top' = see currently running programs 
@@ -89,7 +89,7 @@ By doing this I got taught the following commands:
 ~ $ 'ping ip addres' 
 
 ~ $ 'ssh username@ip address' = open ssh connection. 
-
+```
 ### Air, temperature, and all sort of stuff. 
 
 After the Linux coding I decided to take a step back and began gaining experience with sensors. 
@@ -117,8 +117,6 @@ Serial.println(F("DHTxx test!"));
 dht.begin(); 
 } 
 
- 
-
 void loop() { 
   delay(2000); 
   //a float has decimal numbers and the library reads the measurements.
@@ -158,9 +156,13 @@ And here it looks in action:
 Later on, I could expand this code and the physical product to include the rest of the sensors. 
 
 The wiring is shown here:
-![the wiring](<assets/DHT11 wires.png>)
+![my fritzing diagram](assets/DHT11_by_button_fritzing.png)
 The red cables are 3v, the black cables are the ground and the green cable is the echo for data.
-This version of a DHT11 has a built-in resistor otherwise this would have to be included.
+This version is using a DHT22, this is a updated version of a DHT11 but still provides the same information and still uses the same pins. So i decided to compromise for it, using it in my fritzing diagram.
+
+The wire-frame is shown below:
+![wireframe DHT11](assets/DHT11_by_button_wireframe.png)
+This helps visualise all connections and shows what parts were used for reproductional .
 
 ### Buzzers .pt 2 
 I found out how to make multiple buzzers go off with the press of one button and increase as Mutch as there are pins. 
@@ -201,6 +203,13 @@ Here I made the physical design but instead of buzzers I used lights in order to
 And here is the the board working: 
 ![board working and turned on.](<assets/Buzzer board on.jpg>) 
 
+To Show my wiring more clearly, here is my fritzing board:
+![fritzing_buttons pt2](assets/Buzzer_board_fritzing.png)
+the red wires are 3v, the black wires are the ground connections.
+
+Here the wireframe is shown for parts specification and possible reproduction:
+![wireframe _ buzzers pt2](assets/Buzzer_board_wireframe.png)
+
 ### Python For Dummies. 
 My job was to make a connection between the WebSocket and the database we had set up, and to do this we wanted to use python. 
 To give an easy picture, here is where i would come:

docs/brainstorm/Feedback.md

@@ -33,4 +33,34 @@ We Wil use this Feedback and see what we can do to change the design in a way th
 The design will be updated to include:
 `smaller holes for less distraction.
 `ventilation at the bottom for better airflow. 
-`Remove the lamps on top of the node for less distraction.
+`Remove the lamps on top of the node for less distraction.
+
+### Design questions led by bram
+We have a wooden and plastic design. We were wondering wich one is more easy to look at, and wich one can be more distracting.
+
+1. wich design is more likable
+
+    Sebas : plastic looks better and goes straight to the point.
+    Skip : plastic looks more clean.
+    Dano : plastic is more smooth.
+    Sietse : plastic is better.
+    Ishak : Wood is more ecofriendly.
+
+2. wich design is more distracting.
+
+    Sebas : wood is more distracting and more obvious.
+    Skip : wood, because the school walls are more darker themed.
+    Dano : wood looks off.
+    Sietse : wood would be out of place.
+    Ishak : Wood, but in a good way.
+
+3. Any further comments about the design?
+
+    Sebas : Don't do wood, plastic is more sleek.
+    Skip : plastic looks more professional.
+    Dano : no.
+    Sietse: no.
+    Ishak : in the wood you can burn in your logo.
+
+In conclusion, Even though the wood would atract more attention, the plastic looks better according to the students. 
+So from this information we will continue to make plastic cases for the nodes.

teamdocumentatie/dailyStandupNotes.md

@@ -80,4 +80,11 @@ Sam, tft scherm, rest api ombouwen om data in node tabel te douwen
     Bram: Fritsing, documentation for code
     Sietse: Database
     Dano: Docuemtation for arduino
-    Sam: 
+    Sam: 
+
+26/03/2024
+
+    Sam: gebouw beheer vragen,
+    Sietse: rest api encete vragen
+    Bram: expert voorbereigen, node data updaten
+    Dano: Documentatie schreiven,