Bram documentation updated

docs/LearningProcessBram/documentatie/FirstDocumentation.md

@@ -101,12 +101,16 @@ I wanted to make my own spin on the original design by including a button to act
 The rest of the tutorial was clear and worked like a charm.  
 the code used looks like this:  
 
+Begin by including a specific library for the DHT11.
 ``` 
 #include "DHT.h" 
 #define DHTPIN 4 
 #define DHTTYPE DHT11  
 DHT dht(DHTPIN, DHTTYPE); 
-
+```
+using This perticulair serial port, means that you do have to switch to it when you want to see results coming in. 
+The dht.begin command starts the process.
+```
 void setup() { 
 //the serial port:
 Serial.begin(9600); 
@@ -116,7 +120,11 @@ Serial.println(F("DHTxx test!"));
 //the library start
 dht.begin(); 
 } 
+```
+It starts by making float variables, to give over the information.
+It also includes a error message in case of no feedback.
 
+```
 void loop() { 
   delay(2000); 
   //a float has decimal numbers and the library reads the measurements.
@@ -134,7 +142,7 @@ void loop() {
   float hif = dht.computeHeatIndex(f, h); 
   float hic = dht.computeHeatIndex(t, h, false); 
 
-  //all serial.ptint's send stuff to the serial board to showcase.
+  //all serial.print's send stuff to the serial board to showcase.
   Serial.print(F("Humidity: ")); 
   Serial.print(h); 
   Serial.print(F("%  Temperature: ")); 
@@ -186,7 +194,7 @@ pinMode(buzzerone, OUTPUT);
 pinMode(buzzertwo, OUTPUT); 
 } 
 ```
-Here the button pin will seek a signal, when it is given it will send signals to the other given pins in he if-statement. 
+Here the button pin will seek a signal, when it is given it will send signals to the other given pins in the if-statement. 
 ```
 void loop() { 
   //read is there is input on the button pin, if so send output to the other pins, otherwise keep them off.